We do ship to other countries. We have not decided on pricing yet. Please contact us under support@magglance.com for an individual offer.
Your document has been saved successfully.
Are you sure, you want to order the items in your shopping cart with the commitment to buy?
The PDF document you imported did not have the optimum format. To ensure optimal printing results, the PDF needs to be created in a format of 21.6 cm x 30.3 cm to avoid (small) white unprinted edges.
Do you want to print the magazine anyway?
Your order was successful. The invoice has been sent to you by email. You can also view your invoice in your order listing.
Your eMagazine is now also visible in your internal profile in the magazine overview.
The delivery time depends on the order volume and the order situation. In general, the below mentioned delivery times are adhered to, but please do understand that there may be discrepancies in rare cases. We recommend to consider sufficient extra time.
Shipping
Number of working days
normal (?)
about 5-10
quickly (?)
2-4
lightning (?)
1-3
Contact us for the expected delivery date. Large offers or shipping in countries outside of Germany can deviate from the upper delivery duration.
To print the magazine you must be logged in. If you are not a member yet, you can register for free.
Embed your created magazines on your website. Copy the script below and paste it on to your HTML code:
Everything You Should Know About Fishing Rod
1. About the strength of the fishing rod.
The main effect of the fishing rod is achieved by the bending arc curve of the fishing rod, so the fishing rod cannot bend a certain section, which is easy to break. Many fishermen worry about the tip section being too thin and not strong enough when purchasing fishing rods, so they conduct bending experiments on the tip section, which is unscientific. Some fishermen also worry that their strength is not enough. This is not to worry, because the fishing rod needs to be stressed as a whole during the fishing process, not just a certain section. Therefore, to judge the strength of the fishing rod, an overall experiment must be performed. The method can be: one person holds the rear end of the rod body, the other person holds the thinnest end of the rod body, and the person holding the rear end vigorously lifts the rod body upward, constantly or bending the arc.
View more:
https://www.trade-global.com/fishing-rods.html
2. Regarding anti-rust and anti-corrosion.
Fishing rods will often get wet during use, especially with the high salt content of seawater, and many stainless steel accessories will also rust due to material or use problems. After the fishing rod is used, open the thread of the tailpiece, wash the sand, salt, and other dirt in clean water back and forth, and then use a dry rag to clean the surface moisture, and finally place it in a cool and ventilated environment to dry. Pay special attention to the fact that the fishing rod cannot be placed in a high-temperature and airtight place such as the trunk of a car for a long time.
3. The problem of damage to the guiding eye of the reduced rod.
When many fishermen use the retracted rod, they often hold the handle and shake it hard, throw out the front section and then straighten the guiding eye, which is an incorrect operation method. It should be to clamp the handle section of the fishing rod in the armpit, then pull out the -1, -2, -3, and other sections in order, and twist the rod section outward with a little force. The guide eyes of a section are aligned in the direction. After the whole rod is completely pulled out, check whether all the guide eyes are in a straight line. If there are skewed guide eyes, you can straighten them according to the above method. When the used fishing rod is retracting the rod section, it can be gradually retracted from the last section to the previous section according to the above steps. In short, there is a trick to remember: both pulling out and retracting need to twist the rod body by hand, not with brute force.
